P/N: CLP0596
Frio > Frio Advanced
Design Gallery Specification Video Reviews

 
Frio Advanced
 

Features

- Heat-pipe Direct Touch Technology, Supports 230W Cooling Performance
- Dual 13cm Over-clocking Fan, PWM controllable with 800~2,000 RPM Speed
- Universal Socket Compatibility & Accessory Package


Detailed Feature

Heat-pipe Direct Touch Technology, Supports 230W Cooling Performance

- 5 x Ø6 mm heat-pipes direct touch CPU surface increasing heat conductivity.
- High density Aluminum fins allow larger surface area to quick dissipate heat.
- Premium thermal grease maximizes heat transfer from the CPU into the cooler base for rapid dissipation.

Dual 13cm Over-clocking Fan, PWM function with 800~2,100 RPM Speed

- A pair of high performance red bladed fans generate excellent cooling power.
- Tool-less fan installation provides great convenience for users.
- Vibration-absorbent gaskets decrease noise during operation.
- Fan speed at the lowest RPM provides good performance and very low noise.

Universal Socket Compatibility & Accessory Package

- All-in-one back-plate design, offers support for all Intel and AMD platforms
- Universal socket support : Intel: LGA 2011, LGA1366, LGA1156, LGA1155, LGA775AMD: FM1, AM3+, AM3, AM2+, AM2 


Dimension


Intel Motherboard Installation

Step 1 Step 2

Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers.

Step Two: Put the two Intel mounting bars along the four long screws and secure them with four nuts.

Step 3 Step 4

Step Three: Remove two fans from the cooler before installation.

Step Four: Securing the two T-mounting bars to the base of cooler by short screws.

Step 5 Step 6

Step Five: Applying a thin layer of thermal grease

Step Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly.

Step 7 Step 8

Step Seven: Place a fan to the fan duct at a slanted angle and push the top of fan until hearing a “click” sound. Repeat steps for the other fan.

Step Eight: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done.


AMD Motherboard Installation

Step 1 Step 2

Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers.

Step Two: Put the two AMD mounting bars along the four long screws and secure them with the four nuts.

Step 3 Step 4

Step Three: Remove two fans from the cooler before installation.

Step Four: Securing the two T-mounting bars to the base of cooler by short screws.

Step 5 Step 6

Step Five: Applying a thin layer of thermal grease

Step Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly.

Step 7 Step 8

Step Seven: Place a fan to the fan duct at a slanted angle and push the top of fan until hearing a “click” sound. Repeat steps for the other fan.

Step Eight: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done.


Airflow Chart