P/N: CLP0597
Contac > Contac 39
Design Gallery Specification Reviews Support

 
Contac 39
 

 

Features

Excellent Cost/Performance Value CPU Cooler,supports up to 180W.

• Three Ф8mm Heat-pipes touching directly the CPU, enhancing heat transfer.
• Curved fin design increases airflow and accelerates heat dissipation. 

Dual 120mm Blue LED Fans

• 120mm PWM fan, automatic speed adjustment from 800~2000 RPM.
• Anti-vibration soft mounts decrease noise when operating. 

Universal Socket Compatibility & Accessory Package

• All-in-one back-plate design for accelerated installation
• Universal support: Intel socket LGA 2011/1366/1155/1156/775 AMD socket FM1/AM3+/AM3/AM2+/AM2


Dimension


Intel Motherboard Installation

Step 1 Step 2

Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers.

Step Two: Put the two Intel mounting bars along the four long screws and secure them with four nuts.

Step 3 Step 4

Step Three: Fan module on the cooler must be removed before the installation.

Step Four: Securing the two T-mounting bars to the base of cooler by short screws.

Step 5 Step 6

Step Five: Applying a thin layer of thermal grease

Step Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly.

Step 7 Step 8

Step Seven: Reinstall the fan onto the heat-sink

Step Eight: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done.

AMD Motherboard Installation

Step 1 Step 2

Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers.

Step Two: Put the two AMD mounting bars along the four long screws and secure them with the four nuts.

Step 3 Step 4

Step Three: Fan module on the cooler must be removed before the installation

Step Four: Securing the two T-mounting bars to the base of cooler by short screws.

Step 5 Step 6

Step Five: Applying a thin layer of thermal grease

Step Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly.

Step 7 Step 8

Step Seven: Reinstall the fan onto the heat-sink

Step Eight: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done.