Features
- Top-down Blowing Design structure, benefit from cooling both CPU and motherboard surrounding components.
- 5 x Ø 6 mm heat-pipes direct touch CPU surface increasing heat conductivity - Support up to 160W
- Large High density Aluminum fins provides larger surface area to quickly dissipate heat
- One Powerful 12cm Fan, PWM function with 800~1,800 RPM
- Support all the latest Intel and AMD socket including LGA2011.
Detail Features
Top-down Blowing Design with 5 Heatpipes
- 5 x Ø 6 mm heat-pipes direct touch CPU surface increasing heat conductivity - Support up to 160W
- Top-down Blowing Design benefits from cooling both CPU and motherboard surrounding components
- Large High density Aluminum fins provides larger surface area to quickly dissipate heat
Powerful fan
- one Powerful 12cm Fan, PWM function with 800~1,800 RPM
Support Multi-socket Mounting System
- Universal socket support :
Intel: LGA2011,LGA1366, LGA1156, LGA1155, LGA775
AMD: FM1,AM3+,AM3,AM2+,AM2
Dimension

CLP0602 BigTyp Revo. Installation
CLP0602 BigTyp Revo. Installation
Intel
 |
 |
|
Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers.
|
Step Two: Put the two Intel mounting bars along the four long screws and secure them with the four nuts.
|
 |
 |
|
Step Three: For LGA2011: Screwing the LGA 2011 screw onto motherboard tightly and put the two Intel mounting bars on the LGA 2011 screws. Fasten the four nuts onto the mounting bars tightly.
|
Step Four: Securing the two T-mounting bars to the base of cooler by short screws.
|
 |
 |
|
Step Five: Applying a thin layer of thermal grease
|
Step Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly.
|
 |
|
|
Step Seven: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done.
|
|
AMD
 |
 |
|
Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers.
|
Step Two: Put the two AMD mounting bars along the four long screws and secure them with the four nuts.
|
 |
 |
|
Step Three: Securing the two T-mounting bars to the base of cooler by short screws.
|
Step Four: Applying a thin layer of thermal grease
|
 |
 |
|
Step Five: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly.
|
Step Six: Connect the 4-pin wire to the motherboard’s CPU fan connector. Installation is done.
|
|