P/N: CL-W170-CU00BL-A
Fittings > Thermaltake Pacific M-Pro G1/4 PETG 12mm Fitting - Black
Design Specification

Source: Mike Petereyns (https:////www.PC-customs.be)

Thermaltake Pacific M-Pro PETG Fittings Installation Guide

Step 1. Slide the compression nut over the tube
Step 2. Install the o-ring
Step 3. Install the packing
Step 4. Install the fitting base on your components
Step 5. Tighten the compression nut

Caution: The O-ring and the packing with a groove on the inside diameter must always be installed towards the top of the compression nut.