⚠️
系統維護通知：因廠商伺服器維修，目前網站僅供瀏覽，結帳功能暫時關閉。造成不便，敬請見諒。
Maintenance Notice: Due to third-party server maintenance, checkout services are temporarily unavailable. We apologize for any inconvenience caused.
Search
Advanced Search
My Cart 0
  • Home
  • Pacific 16mm OD 12mm ID PETG Fitting Kit - Pro
Pacific 16mm OD 12mm ID PETG Fitting Kit - Pro Pacific 16mm OD 12mm ID PETG Fitting Kit - Pro Pacific 16mm OD 12mm ID PETG Fitting Kit - Pro Pacific 16mm OD 12mm ID PETG Fitting Kit - Pro Pacific 16mm OD 12mm ID PETG Fitting Kit - Pro Pacific 16mm OD 12mm ID PETG Fitting Kit - Pro Pacific 16mm OD 12mm ID PETG Fitting Kit - Pro
Pacific 16mm OD 12mm ID PETG Fitting Kit - Pro

Pacific 16mm OD 12mm ID PETG Fitting Kit - Pro

In stock
P/N
CL-W155-CU00WT-A
USD$154.99
A LCS combo unit includes PETG tubes, fittings, C1000 Opaque coolant, and other accessories.


Thermaltake Pacific 16mm OD 12mm ID PETG Fitting Kit - Pro

Thermaltake Pacific 16mm OD 12mm ID PETG Fitting Kit – Pro is composed of one C1000 Opaque coolant white, four V-Tubler PETG tubes, 16 Pacific G1/4 Chrome series fittings (10 x compression, 2 x 90° adapter, 2 x 90° compression, 2 x 10mm extender) and other accessories. Together, these provide exceptional performance, unrivalled reliability, and styling to PC enthusiasts.

Tt LCS Certified

Tt LCS Certified is a Thermaltake exclusive certification applied only to products that pass the design and hardcore enthusiasts standards that a true LCS chassis should hold to. The Tt LCS certification was created so that we at Thermaltake can indicate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations, ensuring you get the best performance from the best features and fitment.

C1000 Opaque Coolant White

Made in Germany, the non-flammable C1000 Opaque Coolant is a ready-to-use cooling solution with at least 3 years shelf life in airtight containers, providing great performance while preventing the entire cooling system – copper, brass, nickel, and aluminum – from corrosion.
Learn More

V-Tubler PETG Tube 5/8” (16mm) OD 500mm (4 Pack)

Manufactured from premium PETG, the V-Tubler rigid tubing provides custom PC water cooling configurations with reliability and durability from end to end.
Learn More


Pacific G1/4 PETG Tube 16mm (5/8”) OD Compression Fittings – Chrome

Six durable copper compression fittings allow proper connection to G1/4” ports to properly secure to cooling components.
Learn More

Pacific G1/4 90 Degree Adapter – Chrome

Finished in chrome-plated copper, the adapter fitting is in 360° revolvable design, and consists of two sealed O-rings, allowing users to redirect the fittings at a 90 degree angle for easier tube routing.
Learn More

Pacific G1/4 PETG Tube 90-Degree Compression 16mm OD – Chrome

Made in Taiwan, the 90° compression fitting is finished in chrome coatings, and enables connection of hard tube with G1/4" ports.
Learn More


Pacific G1/4 Female to Male 10mm Extender – Chrome

Finished in chrome-plated copper, the extender fitting is used for extend G1/4” port and connect with larger fittings to provide easier fitting installation and loop management.
Learn More

Remarkable Expansion

The Pacific 16mm OD 12mm ID PETG Fitting Kit – Pro provides multiple LCS components for PC enthusiasts to build the ultimate in custom configuration, allowing them to build up aesthetically-superior water cooling systems by incorporating externally-modular upgrades for their chassis.


Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks:

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse, and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup:

  • It is strongly recommended to use market-proven pre-mix coolant, such as Thermaltake Coolant 1000, which offers great performance while preventing corrosion in the entire cooling system (copper, brass, nickel, aluminum, and steel).
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushes the coolant into the loop.
  • DO NOT let the pump run dry. If no liquid is entering the pump, turn off your power immediately.
  • Fill the reservoir to the top to prevent air from entering the pump.
  • If necessary, tilt the system slightly from side to side to bleed the air out of the loop.
  • Place paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system properly to prevent any coolant or unwanted particles from sticking to your tubes, radiators, and other cooling components.
  • Coolant might fade over time.
More Information
P/N CL-W155-CU00WT-A
Dimensions 528(L) x 123 (W) x 128 (H)
Weight 2.82
Tube Dimensions OD : 16mm , ID : 12mm , L : 500mm
Kit Contents Fittings 
- Pacific G1/4 PETG Tube 16mm OD Compression – Chrome x10
- Pacific G1/4 90 Degree Adapter – Chrome x2
- Pacific G1/4 PETG Tube 90-Degree compression - 16mm OD – Chrome x2
- Pacific G1/4 Female to Male 10mm extender – Chrome x2

Tube
- V-Tubler PETG Tube 16mm(5/8”) OD 500mm 4Pack x1

Coolant
- C1000 Opaque Coolant White x1 

Accessory
- Silicone cord x 1