Pacific W4 RGB CPU Water Block Pacific W4 RGB CPU Water Block Pacific W4 RGB CPU Water Block Pacific W4 RGB CPU Water Block Pacific W4 RGB CPU Water Block Pacific W4 RGB CPU Water Block Pacific W4 RGB CPU Water Block
Pacific W4 RGB CPU Water Block

Pacific W4 RGB CPU Water Block

In stock
P/N
CL-W139-CU00SW-A
A copper base CPU water block with a RGB LED ring, 0.15mm internal fin construction, anti-corrosive nickel plating and universal mounting mechanism.


Thermaltake Pacific W4 RGB CPU Water Block

The all-new Pacific W4 RGB CPU Water Block features a RGB LED, 0.15mm internal fin construction, a copper base with anti-corrosive nickel plating and high-quality PMMA cover, and a universal mounting mechanism that offers error-free as well as no-tools installation. Fits with most G1/4 fittings, the Pacific W4 RGB provides the ultimate in cooling performance, and delivers extreme compatibility for custom PC builders.

Tt LCS Certified

Tt LCS Certified is a Thermaltake exclusive certification applied only to products that pass the design and hardcore enthusiasts standards that a true LCS chassis should hold to. The Tt LCS certification was created so that we at Thermaltake can indicate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations, ensuring you get the best performance from the best features and fitment.

Gorgeous RGB LED with Lighting Controller

The Pacific W4 RGB comes with a special engineered LED light that can be switched among a RGB Cycle, a 7 static colors mode (Blue, Green Red, White, Orange, Yellow and Purple), and a LED Off mode. The brightness is also adjustable. Most importantly, the controller is constructed with a built-in memory function, saving the color applied and insuring the same color selection every time you boot your PC.

Anti-Corrosion Design with Mirror-Finished CU Base

Manufactured with Thermaltake’s highest quality standards, the Pacific W4 RGB’s specially machined copper base has an absolute mirror finish with anti-corrosive nickel plating that provides exceptional heat transfer and anti-corrosion protection for the most demanding use conditions.


Optimized 0.15mm Micro-Channel Structure

The Pacific W4 RGB applies a compact form factor that features 0.15mm micro-channel fin construction for optimal clearance and extreme heat dissipation.

No-Fuss Expansion

Designed to fit all modern CPU sockets with universal mounting mechanisms, the Pacific W4 RGB allows enthusiasts to build superior water-cooling systems from an aesthetic standpoint as well as incorporate modular chassis upgrades for the future.


Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
More Information
P/N CL-W139-CU00SW-A
Dimension 93.4L * 93.4 W* 22 H mm
Weight 670 g
Power Input 1W
COMPATIBILITY Intel:LGA 2066/20113/2011/
1366/1156/1155/1151
/1150/775
AMD:AM4/FM2/FM1
AM3+/AM3/AM2+/AM2
Connector 4-Pin Molex
Rated Voltage 5 V
Threads G ¼”
Heatsink Material Copper + PMMA

User Manual

  • File Name
  • Description
  • Size
  • Version
  • Release Date
  • Manual
  • Multi-language
  • 19.8 MB
  • 2016-12-30