The Tower 100 Mini Chassis The Tower 100 Mini Chassis The Tower 100 Mini Chassis The Tower 100 Mini Chassis The Tower 100 Mini Chassis The Tower 100 Mini Chassis Thermaltake Chassis - The Tower 100 Mini Chassis - First Look
The Tower 100 Mini Chassis

The Tower 100 Mini Chassis

In stock
P/N
CA-1R3-00S1WN-00
USD$89.99
The Tower 100 is a vertically designed mini-ITX chassis with panoramic viewing. It comes with two preinstalled 120mm standard fans and three 4mm tempered glass windows at the front, on left and right side.

Thermaltake

The Tower 100

Big Features, Small Footprint

The Tower 100 Mini Chassis

Designed to expand the legacy of The Tower 900 E-ATX Super Tower Chassis, The Tower 100 Mini Chassis is the newest member of The Tower Series. It features three 4mm tempered glass windows for a stunning view and two preinstalled 120mm standard fans on top and at the rear for exhaust. It is a much smaller version of The Tower 900 with dimensions of 462.8mm (Height), 266mm (Width), 266mm (Depth).

Though it may not be the smallest Mini-ITX chassis on the market, it is a highly capable one that can fit high-end components like the RTX 30 Series Graphics Cards. The Tower 100 Mini Chassis is designed to target users who have a limited space at their workplace or at home, or those who simply do not want their PC to take too much space. No matter if you are a regular users, gamers, or content creators, etc. you will find it ideal and can place it almost anywhere in your room.

 
  • The image is for reference only.
  •  
Vertical Body Design
The Tower 100 is a vertically designed case constructed with solid steel all around, the vertical design allows the chassis to have a smaller footprint, and helps to minimize obstruction to your gaming and workspace area. The vertical design also helps extract heat from the chassis by using a chimney effect, intaking cold air from the base and dispelling the heat via the top.

462.8 mm

266 mm

266 mm

 
  • The image is for reference only.
  •  
Tempered Glass Panels With Panoramic View
The three 4mm tempered glass windows of The Tower 100 are thicker and more scratch resistant when compared to standard acrylic. It not only creates a panoramic view for displaying internal components but also gives users an easy and quick access once the top panel and the three tempered glass windows are removed.
 
 
  • The image is for reference only.
  •  
Sophisticated Space Design

Sophisticated space design maximizes the capcity of The Tower 100 for PC components support and helps tidy up cable management.

 
Air Intake and Exhaust

People may have concern about the cooling performance of a mini-ITX chassis. However, the cold air intakes and hot air exhausts are well-developed, ensuring the interior temperature stays low at all times.

 
  • The image is for reference only.
  •  
Idle and Full-load Temperature

To let our customers better understand the thermal performance of The Tower 100 Mini Chassis, we ran a test system at idle and full-load. We used AIDA64 Extreme Portable and FurMark ASUS ROG Edition both running at the same time for 30 minutes, and the thermal images were taken with Testo 885-2 Thermal Imaging Camera.

Specification

Motherboard ASROCK Z390 Phantom Gaming-ITX
CPU Intel i9-9900k
GPU ASUS ROG-STRIX RTX 2070-O8G-GAMING
RAM ToughRam DDR4 4000 8G (two sticks)
PSU Toughpower GF1 ARGB 850W Gold
CPU Cooler TH120 ARGB Sync AIO Liquid Cooler
Fans TH120 ARGB Sync AIO Liquid Cooler (One Pure ARGB 120mm White and two Pure ARGB 140mm White fans)
Software 1. AIDA64 Extreme Portable 2. FurMark ASUS ROG Edition
Full load 30 min
Camara Testo 885-2 Thermal Imaging Camera
  • Idle
    Full-load
  • Idle
    Full-load
  • Idle
    Full-load
 
Hardware Support and Cooling Solution
The Tower 100 has good hardware support. It can support a CPU cooler with a maximum height of 190mm, VGA with maximum length of 330mm, a power supply with a length of up to 180mm, two 2.5” SSDs with the side bracket, and two 2.5” or two 3.5” HDD at the rear (without rear fan). Although The Tower 100 is a mini-ITX case, it is still optimized for good cooling. The case comes with two preinstalled 120mm standard fans on top and at the rear for thermal extraction. Moreover, you can put one extra 120mm or 140mm fan on the top of the PSU cover and a 120mm All-in-One CPU cooler can be fitted on the top for basic watercooling.
 
 
 
 
 
 
More Information
P/N CA-1R3-00S1WN-00
Series The Tower
Model The Tower 100
CASE TYPE Mini Tower
Dimension (H x W x D) 462.8 x 266 x 266 mm
(18.2 x 10.5 x 10.5 inch)
NET WEIGHT 6.1 kg / 13.45 lbs.
PANEL Tempered Glass x 3 (4mm thickness)
Color Black
MATERIAL SPCC
COOLING SYSTEM Top(exhaust):
120 x 120 x 25 mm Standard fan (1500rpm, 35.8 dBA) x 1
Rear(exhaust):
120 x 120 x 25 mm Standard fan (1500rpm, 35.8 dBA) x 1
Drive Bays
-Accessible
-Hidden

-
2 x 2.5“(with side bracket);
2 x 3.5” (without rear fan)
EXPANSION SLOTS 2
MOTHERBOARDS 6.7” x 6.7” (Mini ITX)
I/O Port USB 3.2 (Gen 2) Type-C x 1, USB 3.0 x 2, HD Audio x 2
PSU Standard PS2 PSU (optional)
FAN SUPPORT Top:
1 x 120mm, 1 x 140mm
Rear:
1 x 120mm, 1 x 140mm
Top of the PSU Cover:
1 x 120mm, 1 x 140mm
RADIATOR SUPPORT Top:
1 x 120mm
CLEARANCE CPU cooler height limitation: 190mm
VGA length limitation: 330mm (Compatible with SFF-Ready Enthusiast GeForce Cards)
PSU length limitation: 180mm

User Manual

  • File Name
  • Description
  • Size
  • Version
  • Release Date