The image is for reference only.
The image is for reference only.
Thermaltake Divider 370 TG ARGB Mid Tower Chassis Thermaltake Divider 370 TG ARGB Mid Tower Chassis Thermaltake Divider 370 TG ARGB Mid Tower Chassis Thermaltake Divider 370 TG ARGB Mid Tower Chassis
The image is for reference only.

Thermaltake Divider 370 TG ARGB Mid Tower Chassis

In stock
P/N
CA-1S4-00M1WN-00
USD$119.99
The Divider 370 TG ARGB is an ATX mid tower case that comes with three preinstalled 120mm ARGB PWM fans, one tempered glass window on the left side, and can support up to a 360 mm radiator at the front and top.
Divider 370 TG ARGB Mid Tower Chassis

Thermaltake designed a brand-new case series that containing stylish side panels and powerful airflow performance blending all the functionality into the Divider Series.

Modern design with Divider 370 TG ARGB’s left panel gives the chassis a unique look while offering a great view of the interior. With three pre-installed ARGB PWM fans, you can enhance the cooling performance with exceptional customizable lighting. The Divider 370 TG ARGB Mid Tower Chassis is the next-gen gaming PC case for regular users, enthusiasts, and gamers, giving them unprecedented satisfaction.

 
  • The image is for reference only.
  •  
 
 
 
 
 
  • The image is for reference only.
  •  
Air Intake and Exhaust

The cooling performance of the Divider 370 TG ARGB is excellent. The large airflow-optimized mesh panel at the front allow optimal air intake. Cooling exhausts are located at the rear of the case. On the top and right side, there are venting mechanisms for air intake or exhaust depends on the user’s overall PC layout design.

 
  • The image is for reference only.
  •  
Excellent Hardware Support & Cooling Solution
The Divider 370 TG ARGB has great hardware support. It can support a CPU cooler with a maximum height of 170mm, VGA with maximum length of 400mm (without radiator), a power supply with a length of up to 230mm (with HDD Cage), two 3.5” HDDs with two 2.5” SSDs or a total of four 2.5” SSDs. When it comes to cooling, the Divider 370 TG ARGB comes preinstalled with three hydraulic bearing 120mm ARGB PWM fans which can effectively lower the operation noise and enhance the thermal efficiency, you can also choose to put three 140mm fans at the front and one 120mm fan at the rear. Moreover, it can hold up to three 120mm fans at the top, two 120mm fans on the right of the motherboard side. For radiator compatibility, it can support up to 360mm at the front and top.
  • 120mm
  • 140mm
  • 120mm
  • 140mm
  • 240mm
  • 280mm
  • 360mm
 
 
 
 
 

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.

Category Caution
Chassis, ARGB Fan, ARGB AIO
  • The motherboard signal connector only supports a 5V header.
  • Make sure your motherboard software is the latest version.
RGB Memory, VGA Waterblock, Distro Plate
  • This product can only be used with either the TT RGB PLUS software or the dedicated Motherboard software. By having more than two applications open may cause conflicts
  • The motherboard signal connector only supports a 5V header.
  • Make sure your motherboard software is the latest version.
More Information
P/N CA-1S4-00M1WN-00
Series Divider
CASE TYPE Mid Tower
Dimension (H x W x D) 491 x 220.3 x 469.1 mm
(19.3 x 8.7 x 18.5 inch)
NET WEIGHT 7.44 kg / 16.4 lbs.
SIDE PANEL 3mm Tempered Glass x 1
Color Black
MATERIAL SPCC
COOLING SYSTEM Front(intake):
120 x 120 x 25 mm ARGB PWM fan (1500rpm, 27.2 dBA) x 2
Rear(exhaust):
120 x 120 x 25 mm ARGB PWM fan (1500rpm, 27.2 dBA) x 1
Drive Bays
-Accessible
-Hidden
2 x 3.5”, 2 x 2.5” or 4 x 2.5”
EXPANSION SLOTS 7
MOTHERBOARDS 6.7" x 6.7" (Mini ITX), 9.6" x 9.6" (Micro ATX),
12" x 9.6" (ATX), 12" x 13" (E-ATX)
I/O Port USB 3.0 x 2, HD Audio x 1
PSU Standard PS2 PSU (optional)
FAN SUPPORT Front:
3 x 120mm, 2 x 120mm, 1 x 120mm
3 x 140mm, 2 x 140mm, 1 x 140mm
Top:
3 x 120mm, 1 x 120mm
2 x 140mm, 1 x 140mm
Right (M/B Side):
2 x 120mm, 1 x 120mm
Rear:
1 x 120mm
RADIATOR SUPPORT Front:
1 x 360mm, 1 x 240mm, 1 x 120mm
1 x 280mm, 1 x 140mm
Top:
1 x 360mm, 1 x 240mm, 1 x 120mm
1 x 280mm, 1 x 140mm
Right (M/B Side):
1 x 240mm, 1 x 120mm
Rear:
1 x 120mm
CLEARANCE CPU cooler max height:
170mm
VGA max length:
340mm (with radiator)
400mm (without radiator)
PSU max length:
230mm (with HDD Cage)

User Manual

  • File Name
  • Description
  • Size
  • Version
  • Release Date