Thermaltake P1000 Pastel Coolant Series is designed with Thermaltake’s latest formula to be used as an anti-corrosive protection fluid and heat-transfer medium for PC water-cooling. With the new liquid surface tension optimizer added to the formula, the P1000 Pastel Coolant Series minimizes the risk of airlock and makes filling up your system easy! The new formula also provides P1000 Pastel Series with color saturation and stability, as well as low viscosity that enables effective flow. Thermaltake P1000 Pastel Coolant Series is formulated to impress and simplify the process of setting up your water loop!
Anti-Corrosive SolutionProtects copper, brass, nickel, and aluminum.
AntifreezeEnsures coolant to run effectively under extreme weathers.
Liquid Surface Tension OptimizerHelps minimizes the risk of an airlock; with the Liquid Surface Tension Optimizer, P1000 only takes about 5 to 10 seconds when starting the system for the first time after filling the loop.
Low Viscosity EnablerLow viscosity allows the P1000 Pastel Coolant to travel through the loop faster, thus dispatching the heat more effectively.
Thermaltake has made filling coolant easy. Thanks to the TT exclusive formula, the old days of repeatedly unplugging the system or waiting for 12 to 24 hours for the air to clear out after filling the loop is behind us. P1000 Pastel Coolant Series has minimized the risk of airlock by adding liquid surface tension optimizer. With P1000, it only takes about 5 to 10 seconds to start the system after filling the loop.
Due to the special formulated process of P1000 Pastel Coolant Series, it resembles a lot of qualities of pure water. Qualities such as low viscosity enables effective flow of the P1000 Pastel Coolant. Viscosity affects the fluidity of coolant, lower viscosity indicates less resistance therefore better flow of coolant. At 20°C, P1000 Pastel Coolant has 26.4% lower viscosity than other coolant and 25.8% lower at 40°C.
Coolant Viscosity at 20°C(m Pa‧s)
- P1000 Pastel Coolant> 1.42m Pa‧s
- Other Coolant> 1.93m Pa‧s
Coolant Viscosity at 40°C(m Pa‧s)
- P1000 Pastel Coolant> 0.89m Pa‧s
- Other Coolant> 1.2m Pa‧s
Being non-flammable, P1000 Pastel Coolant is a ready-to-use cooling solution with at least 3 years shelf life in airtight containers, providing great performance while preventing the entire cooling system – copper, brass, nickel, and aluminium – from corrosion.
Propylene Glycol < 6%
Water < 94%
P1000 Pastel Coolant comes in eight non-transparent colors: red, blue, ice blue, white, green, yellow, grey, and Turquoise. The latest TT formula ensures color saturation, stability and duration.
P1000 Pastel Coolant Series is Eco-friendly! Made with biodegradable materials, P1000 does not pollute the environment or cause bioaccumulation. Thermaltake produced the P1000 Pastel Coolant Series with preserving the environment while enjoying DIY liquid cooling in mind.
Thermaltake recommends the following steps to be taken
Pacific series radiators and water blocks
- To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.
Thermaltake recommends the following steps to be taken after completing your water loop
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
- Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the pump
- If necessary tilt the system slightly from side to side to bleed the air out of the loop.
- Place some paper towels under fittings and joining points to test for leaks.
- Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
- Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
- Coolant might fade over time.
|Hazardous component||1,2-Propanediol< 6%